| Type |
LOVSON Diesel Engine is SINGLE CYLINDER, vertical, totally enclosed
compression ignition, four stroke cycle, cold starting diesel
engine tested as per IS 11170-1985. |
 |
| Cumbustion |
DIRECT INJECTION : cumbustion takes places in a cavity on the
top of the Aluminum Alloy Piston in order to minimise power
loss usually occuring because of gas leakage & heat loss,
resulting in powerful performance, low fuel consumption &
easy start. |
|
| Rotation |
Standard
clockwise rotation when viewed from flywheel end, keeping Air
& Exhaust toward left hand side. |
|
| Lubrication |
Internal
moving parts are partly lubricated by FORCE FEED LUBRICATION
through a LUBRICATING PUMP and partly by SPLASH LUBRICATING
SYSTEM. |
|
| Cooling |
Engine's cooling is arranged by run through water supply. A
radiator or cooling tank can be provided if required. |
|
| Balancing |
Engine is balanced with two balance weights bolted on crank shaft. Flywheel is balanced for longer life of moving parts. |
|
| Drive |
Standard power take off is from the flywheel at full speed.
Power take-off from gear end at half or full Engine speed can
be provided against specific requirements. |
|
| Fuel System |
Fuel is supplied to the fuel pump by gravity feed through wire mesh filter in fuel tank & efficient paper element filter in fuel filter. |
